SHAFT GUIDE

Million Grease

ISEL"Million grease" MGS & MGH are special grease for Million guide, Shaft guide and Servo press unit.
*MGS: Standard for Million guide MGH: Standard for Shaft guide

Features

  • Urea-based extreme-pressure grease, thermo stabled refined mineral oil as the base oil, combined with urea-based consistency enhancer, molybdenum, extreme-pressure additive, polymer, antioxidant and antirust.
  • Good at oxidation stability, water resistance, adhesiveness, thermal resistance and machine stability. Excellent in extreme-pressure property by specially mixed with molybdenum.
  • Suitable and effective for vertical sliding surface as it is highly retentive by the adhesiveness and the water resistance of mixed special polymer.

Million Grease MGS/MGH


Representative physical properties

ISEL Million Grease
MGS		 ISEL Million Grease
MGH		 Test method
Applications/Features Automatic lubrication/
Low friction		 Highly adhesiveness /
Hith water resistance		  
Appearance Yellow, viscous Yellow, viscous  
Consistency(25°C) 320 275 JIS K2220 5.3
Dropping point 260°C 260°C JIS K2220 5.4
Copper plate corrosion
(B method/100°C/24h)		 Passed Passed JIS K2220 5.5
Evaporation 0.4%(99°C·22h) 0.4%(99°C·22h) JIS K2220 5.6
Oil separation rate 0.0%(100°C·24h) 0.0%(100°C·24h) JIS K2220 5.7
Oxidation stability 0.029MPa(99°C·100h) 0.029MPa(99°C·100h) JIS K2220 5.8
Resistance to removal of grease
during the water rinse		 4.9%(79°C·1h) 2.0%(79°C·1h) JIS K2220 5.12
Timken load caoacity test 22.5kg 22.5kg JIS K2220 5.16
High speed 4 balls test
(1770rpm·10s)		 Maximum seizure
prevention load		 1569N 1569N ASTM D-2596
Fusion load 3922N 3922N
Load wear ratio 727N 727N
Water resistance test(80°C·1h) Passed Passed NGS 0307
  • Those numbers are representative physical properties, not standard values.
  • Grease is highly viscous and its adhesiveness and retentiveness are strong.
    Therefore the sliding resistance might be larger depending on its volume and application.